Display 7.7″ OLED, 1280×800, RGB 8-Bit Panel, ~ 16 million colors, wide gamut, 3400:1 Contrast, 176° Viewing, True Blacks
SDI Video I/O SD/HD/3G Support: Single/Dual Link, 2-Inputs, 2-Outputs, 2 Bi-Directional (Can be inputs or outputs), Full-size BNCs
HDMI Video I/O HDMI I/O Version 1.4a support, Up to 1080p60 422 8-bit
LUT Support ARRI, Canon, Sony, or Custom User-Loadable LUTs*
Focus Assist Video + Edges, Edges Only, Enhanced Edges, user choice of color: Red, Blue, Green + Pulsing
Zebras Two Levels, one allows for a user specified range, the other is active on a specified IRE level and above
False Color False color with 4 programmable levels
Waveform Monitor Luma only, RGB, Red only, Blue only, Green only, and RGB Parade
Histogram Luma only, RGB, or Red, Blue or Green individually
Vectorscope Color vectorscope with 2X zoom
1:1 Pixel Mode Image Zoom, Vertical Flip and Horizontal Flop, Aspect Ratio Guides, Horizon Indicator
Quad Stream Display Display four independent HD streams simultaneously on OLED and/or external monitor (quad splitter),
Digital Audio I/O 8-Channel Embedded Audio (48KHz, 24-bit) (2 Channel initially, 8-Channel via future firmware update)
Analog Audio I/O 3.5mm stereo unbalanced input up to -10dB, 3.5mm stereo headphone outputRemote and Timecode RS-232 I/O, programmable GPIO. Timecode: LTC I/O (BNC) or embedded SDI / HDMI
Wireless Control Bluetooth LE with iPhone/Android App, to be provided after initial release of Odyssey7Q
User Interface Capacitive Touchscreen, Two user-programmable context-sensitive mechanical function keys
Firmware Update Via USB Port to host computer, Firmware Updates downloadable from website: www.convergent-design.com
DC Power Input 10 to 34 VDC with built-in reverse polarity protection; locking Neutrik connector, built-in power switch
Power Dissipation 8 Watts (monitor only), 9-15 Watts (simultaneous monitor/record mode)
Weight and Size 540 grams / 1.2 lbs., 7.9″ x 6.1″ x 1.0″ (200 x 155 x 25 mm), -10 to +40°C (Operating), -20 to +70°C (Storage)
Onion Skinning Overlay pre-recorded still frame on live video with opacity slider (requires CD SSD)*
View Monitor Out Display the monitor-out (viewfinder data) on the OLED while recording a clean video signal.
Record Clean Video Available when using the Sony F3, Sony FS700, Canon C500 and ARRI Alexa cameras.
Record Triggers Touchscreen, SDI record trigger (ARRI, Canon, Panasonic, Red, Sony), Optional Remote Control Cable
Recording Media Convergent Design Enterprise Grade SSD in 256GB & 512GB sizes, 400MB/sec write, 500MB/sec read speed,
compatible with USB 3.0 and Thunderbolt adapters. SSDs must be purchased separately.
(Standard) Compressed (36 to 220 Mbps), 8/10-bit YCC only, up to 720p60, 1080p60/1080i60 (.mov format). Requires at least one Convergent Design SSD (other SSDs/HDDs are not supported). Automatic switch over to second SSD. Note: this recording capability is always available without watermark.